Plug-In Supply

Prius Gen 2 Install

Installing a Plug-In Supply Add-On Battery system in a Toyota Prius Gen 2 (2004 to 2009).

Safety First !

Safety First !

Don't let this happen to you!
Steps: 2
Back Seat Removal

Back Seat Removal

The seat backs on the back seat are removed to gain access to the traction battery.
Steps: 7
Cargo Deck and Storage Tray Removal

Cargo Deck and Storage Tray Removal

How to remove the rear cargo deck and plastic storage tray.
Steps: 10
Left Rear Interior Side Panel Removal

Left Rear Interior Side Panel Removal

Remove the left rear interior side panel and set aside. Drivers side.
Steps: 13
Service Plug Removal

Service Plug Removal

Removing the service disconnect. This protects you by removing high voltage from the high voltage wires. Always remove this plug before working on the battery pack.
Steps: 4
Disconnect Accessory Battery

Disconnect Accessory Battery

This step is optional. You do not have to disconnect the 12v accessory battery during the installation.
Steps: 3
High Voltage Tie-in in a Gen 2 Prius

High Voltage Tie-in in a Gen 2 Prius

Installing the HV Tie-in cable into a Gen 2 Prius.
Steps: 39

© 2017 Plug-In Supply